In which areas should I set up virtual no-go zones?

Applicable Models

• MOVA 600/600 Kit/1000

• MOVA 600 Plus

• MOVA LiDAX Ultra 800/1000/1200/1600/2000

• MOVA LiDAX Pro 600/800

Please set up virtual no-go zones in the following areas:

1. Areas where the robot is prone to falling, such as swimming pools, sand pits, cliffs, etc.
2. Areas where the robot may mistakenly cut, such as flower beds, vegetable gardens, etc.
3. Areas where the robot is likely to collide and get stuck, such as trampolines, swings, slides, outdoor furniture, curbs, trees, houses, etc.
4. Slopes or depressions with an incline greater than 24° (45%).
5. Areas with exposed electrical wires on the ground.

Applicable Models

The following steps apply for the following models:

• MOVA ViAX 250/300
• MOVA ViAX 500/600

1. Areas where the robot is prone to falling, such as swimming pools, sand pits, cliffs, etc.
2. Areas where the robot may mistakenly cut, such as flower beds, vegetable gardens, etc.
3. Areas where the robot is likely to collide and get stuck, such as trampolines, swings, slides, outdoor furniture, curbs, trees, houses, etc.
4. Slopes or depressions with an incline greater than 22° (40%).
5. Areas with exposed electrical wires on the ground.