How to Establish a Connecting Path for the Robot

Overview

This article explains how to establish a connecting path between different areas for the robot using the App.

This article applies for models below:

• MOVA 600/600 Kit/1000
• MOVA 600 Plus
• MOVA ViAX 250/300,
• MOVA ViAX 500/600
• MOVA LiDAX Ultra 800/1000/1200/1600/2000
• MOVA LiDAX Pro 600/800

• MOVA LiDAX Ultra 1000/1600/2000/3000 AWD

Establishment procedure

Step 1. Start creating the path

• Ensure that your phone is connected to the robot via Bluetooth.

• Remotely control the robot to walk inside one of the areas and tap "Set Starting Point" in the App.

• Then remotely control the robot to walk to the edge of another area, and the outline of the connecting passage will be displayed in real time in the App.

Step 2. Complete the path

• When the robot has entered the other area, tap "Complete" in the App to finish establishing the connecting passage.

Warm Tips

1. When establishing a passage, ensure that the starting and ending points are within the working area and at least 1 meter away from the edge of the working area.
2. The robot will only move and will not mow grass while passing through the passage.
3. If the charging station is not within the working area, you can also establish a connecting passage using the same method to help the robot return to the base station. The other end of the passage must be directly in front of the base station and within 0.5 meters.