How to Properly Install the Robotic Mower

Before installation

Open the outer packaging box and take out the robot, charging station, charging station base plate, and other related accessories.

This article applies for the models below:

• MOVA 600/600 Kit/1000

• MOVA 600 Plus

• MOVA LiDAX Ultra 800/1000/1200/1600/2000

• MOVA LiDAX Pro 600/800

• MOVA LiDAX Ultra 1000/1600/2000/3000 AWD

Installation Steps

Step 1. Choose installation location

• Install the charging station in an open and flat area near the edge of the lawn and close to an AC power socket. Ensure it is within Wi-Fi coverage.

• Keep at least 1 meter of clearance on the left, right, and front sides of the charging station. Also ensure the surrounding grass height is below 6 cm.

Step 2. Secure the charging station base

• Take out the hex key and ground nails from the accessories. Use the hex key to fix the ground nails into the ground to secure the charging station base plate.

Step 3. Assemble the charging station components

• Insert the charging tower into the charging station base plate until a click is heard.

• Then push the lidar cleaning brush into the charging station at the aligned position.

Step 4. Connect the power supply

• Take out the power adapter and connect it to the extension cable. Ensure the adapter is placed at least 30 cm above the ground, then plug it into a power socket.

Note: When all connections are correct, the charging station indicator light will be solid blue.

Step 5. Charge the robot

• Push the robot into the charging station to start charging, ensuring the charging contacts on both the robot and station are properly aligned.

Note: During normal charging, the charging station indicator light will flash green. When fully charged, it will stay solid green.